Technical advantages: Float valve is one of the tray structures widely used in China at present. It has outstanding excellent performance, and its main characteristics are: Strip Guide Float Valve,Stainless Steel Float Valves,Acid Resistant Steel Float Valve,Strip Guided Float Valve Kit Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com
16-ton dredge excavator off the assembly line
1. The product is equipped with international brand engine, international leading hydraulic system, excellent performance, standard 10.5 meters longer working device, high work efficiency.
2. The total width of the whole machine is less than 4.4 meters, which is convenient for short-distance transportation and low transportation cost;
3, the new electronic control system, configure the automatic idle function, more fuel-efficient;
4. Steering, with greater driving force and good passability and mobility when climbing. Floating on the water, climbing and steering, etc., have good performance.
5. It can be applied to work in shallow water areas and swampy lands, and can be used for watercourse dredging, lake development, construction of wetland parks, development of coastal beaches, development of salt lakes, tail-sand mine treatment, and water conservancy projects and marshland development projects.
6, optional 12.5 meters long working device. (This article comes from Lux click into the Lester online purchase page )
â‘´ Large operating flexibility
As the valve plate can rise and fall freely, it can adapt to the change of air volume from big to small, and the air gap speed is almost constant. It can also maintain high separation efficiency in a wide operating range with frequent load changes.
⑵ High separation efficiency
In practical application, the tray efficiency can reach 60~70%, 10~15 higher than that of bubble cap tray, and it is still very high at low load. Due to the high efficiency, the product quality is improved accordingly.
(3) Large processing capacity
Because the arrangement of float valves is much more compact than that of bubble cap tower, the opening rate is increased. In addition, the air flow blows into the liquid level in the horizontal direction, so the entrainment of foam is low, which can improve the air flow and increase the production capacity. The production capacity is 20~40% higher than that of bubble cap tower.
(4) Pressure drop is small
The air flow through the float valve shrinks, expands and turns only once, and the pressure drop is lower than that of the bubble cap tray. The pressure drop of each tray in the atmospheric tower is only 3-5 mm Hg.
In addition, it has simple structure and low cost; Long service life, no fear of dirty materials; Convenient installation and use.
Performance characteristics of float valve tray:
(1) The processing capacity is smaller than tongue type, sieve plate, and larger than bubble cap tray;
(2) Large operational flexibility;
(3) The pressure drop of the dry plate is larger than that of the tongue type, the sieve plate tray is larger, the pressure drop is smaller than that of the bubble cap tray, and the liquid level gradient on the tray is smaller;
(4) The entrainment of fog is small;
(5) Simple structure and convenient installation.
16-ton dredge excavator SC160SD.8 officially rolled off
Recently, the company's SC160SD.8 dredging excavator formally went offline. This is another high-end R&D and production of the company's dredging series excavators. It is suitable for multi-use excavation in soft soil, land, marsh, shallow water and other operating environments. machine. Its main features are that it guarantees a low ground pressure ratio, adapts to muddy roads and operations where the soil carrying capacity is extremely low, and can float on water. The off-line SC160SD.8 dredging excavator meets the needs of different customers, adding new economic growth points for the company.
Related news: Riesde excavator dredging