Two Component Sealant Extruder
Two component sealant extruder is divided into two items: Air motor mode and Pneumatic Mode; Both modes can be used in silicone sealant and polysulfide sealant for insulating glass;;
We have two common models: ST05; and ST06; ST05 adopts air cylinder system which is from China Taiwan Airtac brand as power supply; ST06 uses the air motor system which is from Korea YLKorea brand as working energy; Compared to ST05 pneumatic mode, the whole lifetime is more longer, which can be used more than 5years; The mixture rate of two models are 10(white sealant):1(black sealant)
Both models only use air supply to work without electricity; it can save cost to some extent and be more easier to operate;
Butyl Extruder Machine,Pneumatic Two Component Sealant Extruder,Manual Two Component Sealant Extruder,Silicone Sealing Machine JINAN WEILI MACHINE CO LTD , https://www.wlglassmachines.com
1.     Stable Injection Device
Â
    A PID temperature control, precise temperature control of barrel.
    There are three or four screws and barrels with optimal design
Respectively, nitride, hard plating, dual-metal, which is suitable for different processes of a variety of plastics and the choice of product.
    Two-guided direct line guided bar supports, double-balanced rapid injection.
    The high-torque hydraulic motors offer a stable plasticizing capacity, high-precision electronic device position detection enable accurate measurement.
    Multi-injection speed and pressure and multi-level holding pressure settings, switch from the injection time, location, pressure control to ensure the quality of molding.
    Multi-level back-pressure of pre-plastic and pre-speed are computer-controlled, anti-drooling and automated auto purge,
    Expected to prevent cold-start function to ensure that the screw, barrel will not be harmed.
Â
2.   Stable And Reliable Clamping Unit
  Â
    Five-point double toggle diagonal structure, template design by computer optimization.
    Mechanism, electronic & hydraulic triple interlock safety protection function.
    Sensitive low-voltage mold protection device.
    Multiple hydraulic liftout type
    Multiple stages control for mold opening clamping pressure, speed positioning control
    Hydraulic motor-driving gear mold adjustment.
    Special technique treatment, reliable strength
    Automatic centralized lubrication system
    Mold open and clamping, liftout position control
    Automatic mould adjustment function
    Robotic pincher mechanical installation positioning interface.
    Core pulling and inserting system is suitable for the complicate structure mould.
Â
3.   Fast Response, Stable Output
Â
    The manual plug value hydraulic system make the machine having quick and smooth motion response
    Pressure and flow double proportional value control
    Hydraulic oil cooling device
    High-performance imported hydraulic unit with optimizing allocation
    The fuel tank has a big opening hole so can be cleaned easily.
Â
4.   Quick Reaction Stability System
Â
    Special control the computer for plastic injection machine use, control and display relatively independent with high reliability.
    Technical parameters pre-setting and storage function
    Parameters information protection function
    Charging barrel temperature deviation automatic adjustment function
    Abnormal alarm function
    Front and back door emergency stop button
    Real-time monitoring can display the condition of each motion
    Electrical motor safety protection device
    Robotic pincher interface
    Cutting photoelectric switch
    System hardware I/O detection function
    Charging barrel temperature is controlled accurately by computer setting and PID closed-loop manner.
    Screen protection function , prolong the life of screen using.
    Full-enclosed electrical-controlled box, electrical components are neatly arranged, never interfere with each other.
tandard Features Â
Double-cylinder balance injection system Multi-stage pressure&speed injection Back pressure adjustment device Low pressure mold protevtion Multipe hydraulic ejector knock-out Mechanical electrical safety device Auto lubrication system Hydraulic pressure full proportional control Computer control system Molding data memory system Oil temperature controller Hopper magner Optional Features   Double hydraulic pulling and inserting Air blowDV Hydraulic unscrew device Hydraulic safety device High speed clamping Linear guide Standard Accessory Anti-vibrating pad Spare parts kit Tool box Iubrication oil Optional Accessory  Robotic pincher Hopper dryer Auto loader Mold clamps Water chiller Plastic dehumidizer Mold temperature controller Oilbypass filter Plastic granulator Plastic color-mixer Inverter 
Automatic Preform Injection Molding Machine
Model NO.: HKS
Computerized: Computerized
Certification: CE, ISO9001:2008
Machine Capacity: 88 Tons ~ 1288 Tons
Certificate: CE
Trademark: Hautek
Origin: Ningbo, China
HS Code: 84774010