In recent times, heavy rainfall has basically been occurring in various regions of southern China. Heavy rainfall has made the drainage systems of some cities unable to work properly, and the entire city has been flooded. In some road sections where drainage equipment is relatively inaccessible, it is inevitable that vehicles will be involved in wading in the process of driving. After wading, it is believed that vehicle owners will understand more or less and must take some measures according to the extent of wading. Only by dealing with measures can the damage to the vehicle be minimized. Then, take a quick look at the emergency measures for wading the vehicle! The first thing to do is to determine the degree of wading through the vehicle. If the amount of water is just to the feet and feet of the vehicle, the only thing to do is to open the cover and remove the air filter to check for any traces of water. If you do not need water, you only need to open the door, and then you can take out the mat in the sun. But for some high-end models, it is still necessary to pay more attention, because some high-end models of circuit-integrated computer control units are buried in the vehicle's plastic, this time you need to go to a professional vehicle repair shop to check, The late use of the treatment will affect the normal use of the vehicle. Followed by the analysis of static wading for vehicles, if the vehicle is in the process of static stop and was immersed in rain, especially when the water is more serious, it is necessary to remove all the vehicle seat rubber, etc. . The most important thing is to pay attention to checking the engine. The best thing is to change the oil, and the transmission oil of the transmission also needs to be replaced. If the vehicle is wading for a long time, it is best to go to a professional repair shop to conduct a comprehensive inspection, otherwise the car will likely break down at any time if there are potential problems with the control modules and lines inside the vehicle. The last thing to note is that the extent of vehicle wading has exceeded the exhaust pipe. Do not re-ignite at this time. Otherwise, the insurance company’s claims will not be obtained. It is also very easy to cause a series of problems such as the top cylinder and the breakage of the connecting rod in the vehicle. In severe cases, it is very likely that the engine will be directly scrapped, so it must be careful. Plastic Moulding Machine,Desktop Injection Molding Machine,Vertical Injection Moulding Machine,Small Injection Molding Machine Turn Machine (Zhejiang) Co., Ltd , https://www.turn-machine.com