The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com
Although it is already the world's largest robot market, China has lagged far behind industrialized countries in robot density. In the manufacturing industry, China has only 30 robots per 10,000 workers, which is far below 437 in South Korea, 323 in Japan, 282 in Germany, and 152 in the United States.
IFR estimates that automakers are competing to build factories in China and rising wages. By 2017, the number of robots in China will increase by more than 1 times to 428,000 units. IFR Secretary-General Gudrun Litzenberger said: “Companies will be forced to increase their investment in robots to increase production efficiency and product quality. At this stage, the automotive industry is the industry that is driving the development of the robot industry. -3 years will be the electronics industry."
Japanese manufacturers currently account for about 60% of the robot industry, but Chinese robot manufacturers have grown rapidly, accounting for about a quarter of the robot market. The rest of the market is occupied by European and American manufacturers.
The four overseas robot manufacturers - ABB Switzerland, Kuka Germany, Yaskawa Electric and FANUC - have set up factories in China. It is expected that more manufacturers will set up factories in China.
The automotive industry is China's largest robotic customer, accounting for about 40% of the robots in use. China is the world's largest car market and the largest car producer.
The electronics industry will follow the automotive industry in the use of robots. Foxconn, the electronics giant, has produced its own Foxbot robots and purchased robots from other manufacturers.
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.
China will become the first robotic power in 2017
On February 6th, the International Robot Federation (hereinafter referred to as “IFRâ€) said on Thursday local time that due to the automation of automobile and electronic product production, by 2017, the number of robots used in Chinese production plants will exceed that of any other country. .