Chinese Superior Wall & Roof Panel Welding Roll Forming Machine

May 05, 2024

Model NO.: YX40-210-1050
Automatic Grade: Automatic
Product Type: Roll Forming Machine
Machine Color: as Required
Voltage: 380V/3pH/50Hz
Main Motor Power: 7.5kw
Cutter Power: 4kw
Trademark: JinChenTong
Transport Package: 1*40gp
Specification: 9.2*1.5*1.4m
Origin: China
HS Code: 84552210
Wall & Roof Panel Roll Forming Machine

Technical Parameter

 
ID NO. Item Specification
1 Inner diameter of de-coiler 508mm, 610mm
2 De-coiler capacity 5T
4 Main motor power 5.5KW
5 Forming speed 10-15m/min (without punching and cutting)
6 Roller station: 16 stations up to our final design
7 Machine form single stand with chain transmission
8 Material of roller Super 45#steel
9 Material of shaft 40Cr
10 Diameter of roller shaft ¢70mm
11 Thickness of steel coil: 1.0-2.5mm
12 Main motor power 11kw
13 computer  PLC


Profile drawing:
Chinese Superior Wall & Roof Panel Welding Roll Forming Machine













2.Main Components
Serial No. Commodity & Description Quantity
A Hydraulic de-coiler(5T) 1 SET
B Pinching feeding and leveling unit 1 SET
C Main roll forming machine 1 SET
D Hydraulic cutting device 1 SET
E Computer controlling cabinet 1 SET
F Hydraulic station 1 SET
G Output table 1 SET
H Box interlocking machine 1 SET




3.Technical process: 
un-coiling →feeding guide →pinching and leveling device→main roll forming → hydraulic cutting →outputting
 
  1. Flow chart:

Chinese Superior Wall & Roof Panel Welding Roll Forming Machine






Warranty
Warranty: 1 year warranty from date of shipment
Guarantee:
Guaranteed against malfunctions due to manufacturing defects for 1 year after date of shipment. Repairs will be made free of charge.




 

Drum Wood Chipper

The structural composition of the drum chip machine: the frame, cutter roller, upper and lower feeding roller, conveyor belt, hydraulic system and other parts constitute the structural main body of the drum chip machine.The base of the drum slicer is welded with high cavity steel plate, which is the basic support part of the whole drum Wood Chipper.Two flying knives are mounted on the drum type wood slicer.Using the flying knife bolt made for the drum chipper, the flying knife is fixed on the cutter roller through the pressure block;Such a design can be based on the different cutting materials, feeding roller can be used in a certain range of hydraulic system to float up and down, can achieve the effect of cutting different specifications of wood chips.

Hammer Roller Wood Crusher,Plyboard Wood Chipper,Crushing Plyboard Wood Crusher,Drum Wood Chipper

Jinan Shanghangda Machinery Co., Ltd. , https://www.shdmachines.com