Constant temperature constant test machine installation matters Because the large-scale test machines are relatively large in size, pay attention to the following precautions during the installation process in order to upgrade in the future use or to facilitate other operations. 1. The first thing to consider is the heat dissipation of the machine and some coordination work that is convenient for daily inspection and repair. When installing the equipment, the distance between it and other equipment and walls should be more than 60 cm, so that a good condition of maintenance and heat dissipation can be maintained, and the machine can be operated efficiently. 2. In the process of installing the testing machine, the level of the whole ground should be measured by the level meter, so that an accurate data can be guaranteed to be tested, and a relatively stable ground should be maintained during the selection of the ground. There must be no vibration on the ground, and there is no interference with other machines. 3. For the constant temperature and constant pressure test machine, because it is sensitive to such a data of temperature change, if the ambient temperature changes more severely, the machine may not work properly, resulting in some experimental errors. Due to the opportunity to add lubricating oil and some organic oils, the machine installation environment should be a relatively safe place, and the relatively high temperature heat source should be kept away from the machine. The machine should be installed at room temperature to work, so that the data obtained by the test is more accurate. 4. For the surrounding environment of the testing machine, the ventilation and the environment should be kept clean, and the machine should also avoid direct sunlight, which will affect the performance of the machine, and the room should be kept ventilated. 5. For the setting of the line and the setting of the water pipe, try to reduce the distance, so as to ensure a timely test data. Polished Stainless Steel Coil,Hot Rolled Stainless Steel Coil,Cold Rolled Stainless Steel Coil,Stainless Steel Cold Rolled Coils HANNSTAR INDUSTRY , https://www.hannstarmetal.com