HTD is a professional machinery manufacturer with more than 15 years. Since its establishment, we have been adhering to the core of user needs, and have been providing stable quality equipment, raw materials, and thoughtful after-sales service to customers in more than 30 countries and regions around the world, winning the trust of customers and praise from many companies.
The fully automatic KN95 N95 folding face mask making machine is a fully automatic machine for producing folding mask production lines. It uses ultrasonic technology to fuse 3 to 6 layers of PP non-woven fabrics, activated carbon and filter materials, non-woven fabrics, ear bands, printing, half-folding, edge-sealing, and roll cutting. It can also process 3M 9001, 9002 and other folding masks. Depending on the raw materials used, the produced masks can reach different standards such as FFP1, FFP2, N95, etc., without manual operation, all are produced by mechanization.
Through our unremitting efforts and continuous research and development, we provide customers with labor-saving, efficient and stable automated production equipment,We offer free consulting, can strongly supply the mask materials and machine efficient after-sales service in One-stop service.All of our products have CE and test reports.
We can be your reliable business partner!
N95 Medical Mask Making Machine,N95 Folding Dust Mask Making Machine,Automatic Medical Mask N95 Folding Nonwoven Machine,Respirator N95 Folding Elastic Earband Mask Machine,Kn95 N95 Ffp2 Fold Face Mask Machine GUANGZHOU HTD INTERNATIONAL , https://www.htdmask.com
There is a wide gap between the standards of the industry's products and domestic comparisons with foreign countries. It is not difficult to find that there is a big gap between the two. As far as the material standards of fasteners are concerned, domestic product standards generally do not specify specific material steel grades, and only require chemical composition requirements for mechanical performance grades. In contrast, individual US standards such as ASTM standards will The specific steel grades are specified. Because there is no corresponding steel grade in China, and it cannot be accurately docked with international standards, it will naturally bring certain difficulties to the export. Although some domestic enterprises have already begun to realize this, they have developed new steel grades stipulated in the foreign fastener standards. However, this is only a small step in the progress, and international standards have yet to be promoted and improved throughout the industry.
The position of fastener companies in China has always been not very clear about their positioning, blind production, and lack of matching and cooperation with the host companies. It can be said that the vast majority of domestic fastener companies' products are only produced in batches according to a unified standard. They do not care whether their products can meet the matching requirements of the mainframe products on the market. They are blindly pursuing their own factory volume, and thus tightening. The part became a 'universal' fastener, but it was difficult to guarantee the mechanical stability of the host application.
Compared with foreign branded products, what we lack is the 'dedicated' dedication. When it comes to this issue, I very much agree with the OEM development model mentioned by Mr. Wang Changjiang, an expert in the engineering machinery industry. This concept has been developed in the fastener industry. The same applies, that is, the aforementioned fastener production companies need to cooperate with the host company, which can be one-on-one or even one-to-many.
I think that if we want to make our fastener industry battle the international battlefield and battle it out, first of all, 'grass and grass' first, which is the perfection of industry standards, and take advantage of alliances with the host companies, plus their own technical quality to win their own piece. country.
Specifically speaking, one is the lack of sound industry standards, and the other is that the fastener industry as an important component of the accessory industry is not accurate enough for the positioning of the fastener industry, in other words, there is a long-standing conflict between the host company and the host company. The state of the pattern. This is where our fastener industry has always been unable to break through international barriers, rush out of the world, and the crux of the war. It is also our biggest obstacle to losing to foreign brands.
Our main products are:fully automatic medical Mask machine,fully automatic 2D folding mask machine like KN95 mask making machine and N95 mask making machine,3D mask making machine like the fully automatic Cup Mask Machine,disposable 3ply flat face mak machine,KF94 fish type mask making machine and others non-woven fabrics products and raw materials,spare parts and so on.
This machine is an all-in-one machine of automatic three-dimensional folding mask. From the feeding of cloth to the completion of automation of finished products, including (upper bridge strip, printing), spot welding of elastic belt, folding, forming, welding and cutting of finished products, waste removal, and finished product output, the automatic production on a machine is fully realized. (The whole machine only needs one person to operate).
Domestic fasteners go to the world knowing each other can be victorious
As a first manufacturing country of fasteners, our production company has experienced hardships for many years. Since joining the WTO in 2008, we have been frustrated overseas and have suffered. Although we have little success, we still cannot get rid of 'indigestion'. What is the embarrassing situation of "outside the enemy"? Is it a quality problem or a technical problem? I believe that the key to the problem is not here, but that our development model has drawbacks.