Bicycle Grip is one of the most easy to replacement accessories on the Bike, it can increase the friction between the handle bar and the rider hand to help control the direction, especially in the off-road surroundings. Bike Grips are available in different materials. There are 4 common materials Handle Grips on the market now.
PVC Grip: relatively cheap but poor low temperature resistance, will lose elasticity after long-term use.
Rubber Bike Grip: Has good abrasion resistance, long service life and light weight.But it`s difficult to recycle materials, not very environmentally friendly.
Sponge Grip: It is good shock absorption and water resistance. But hard to assembly and disassembly, and the fit between the cover and handlebars is not tight, which is a safety hazard when using.
Silicone material: The grip fit tightly with handlebar, good safety, soft feel and good shock absorption. The disadvantages are also obvious, particularly difficult to installation and disassemble, pure silicone material handlebar non-slip effect is not good enough, especially when wet, more likely to hand slip.
Bicycle Grip,Rubber Bike Grip,Bike Grips,Handle Grips Suzhou Jingqiyao Intelligent Technology Co., Ltd. , https://www.jingqiyaoparts.com
The high-pressure water jet of the Dongfeng Dolika high-pressure cleaning truck is a high-pressure cleaning device that passes the high-pressure cleaning vehicle to press normal water to hundreds or even thousands of atmospheric pressures, and then through a special nozzle at a very high speed (200-500 meters). / Second) A very high energy stream is ejected. This small stream of water has enormous energy like bullets. It can remove salts, alkalis, scales and various blockages on the inner wall of pipes, and can also cut steel plates, remove sand from castings, and remove metal from rust. The use of this highly energy-rich water stream for cleaning is a high-pressure water jet cleaning. Thanks to the superiority of this process, more and more users have already received the pro-gaze. What are the advantages of high-pressure cleaning of Dongfeng Doolica high-pressure cleaning vehicle?
1. The water jet cleaning of Dongfeng Dolika high-pressure cleaning vehicle does not produce as much dust as blasting shot blasting and simple mechanical cleaning, polluting the atmosphere and damaging human health. Unlike chemical cleaning, there are a lot of acid and alkali wastes that pollute the river, soil and water quality. Water jet is based on tap water as the medium, odorless, odorless, non-toxic, completely environmental protection without pollution.
Second, the purely physical method does not have any corrosive effect on the pipeline. III. Wherever the water jet can reach directly, no matter whether it is the pipeline and the inner cavity of the container, or the surface of the equipment, whether it is a hard fouling material or a solid plugging material, It can be quickly separated from the mother and thoroughly cleaned. This kind of cleaning method of Dongfeng Duolika high-pressure cleaning vehicle has no special requirements for the material, characteristics, shape and scale type of the equipment. As long as it is direct enough, it is widely used. First of all, the Dongfeng Doolika high pressure cleaning truck saves water and energy, high pressure cleaning water consumption is only 3-5 cubic meters / hour, the power used is only 37-90 kilowatts; second; without any filler and detergent Third, the medium used by high-pressure water jets of high-pressure cleaning vehicles is tap water;
5. When the Dongfeng Doolika high-pressure cleaning vehicle cleans the inner hole of the pipeline and the heat exchanger, it can remove all the foulants and plugs in the pipe, and the metal body can be seen. High-pressure water jets with huge energy and moving at supersonic speed can easily destroy the hard foulants and plugs in the pipeline. At the same time, the pressure of the high-pressure water is less than the compressive strength of the pipeline, and it has no damage to the pipeline. It is truly High quality dredge cleaning. The traditional bamboo dredge and dredge dredging can only solve the temporary flow of the pipeline, and can not fundamentally solve the problem of six, due to the Dongfeng Doolika high-pressure cleaning vehicle water jet (also known as water bomb) erosion, demerits, shears Cutting, grinding and other composite crushing action can immediately break the scale off. It is several times to dozens of times faster than conventional chemical methods, sand blasting methods, simple mechanical and manual methods, and is very efficient.
Dongfeng Doolika high pressure cleaning car high pressure water jet cleaning technology
Dongfeng Duolika high pressure cleaning truck can be equipped with sprinkler device, install green sprinkler, front punch, rear sprinkler, side spray, can carry out green watering, spraying, dust, high pressure flushing the road, etc., can be used to save fire in an emergency. It is mainly used for cleaning the sediments of urban sewers and pipelines, and the dredging of mudslides in dead corners. It can also be used for cleaning industrial drainage pipelines, wall surfaces, etc., cleaning roads and square grounds.