Corrosion wear brings great persecution to the crusher equipment. It is quite serious for the destruction of the equipment. Every year, a large number of metals are scrapped due to corrosion and wear, resulting in a huge loss. The persecution of decay and wear is not only the loss of the whole machine, but more serious is the destruction of the equipment layout of the crusher. The waste and equipment in the production are disordered. This kind of wear and tear occasionally limits the possibility of adopting new technology and new equipment. It is inevitable economic significance to study corrosion and wear and avoid corrosion. Corrosion wear of metal is divided into two situations according to the principle of corruption. First, electrochemical corrosion is caused by the effect of electrolyte induction, and some current occurs. Second, chemical corrosion is caused by dry gas or non-conductive liquid medium. The result. The rate of metal destruction caused by electrochemical corrosion is relatively fast, and the signs of severe damage caused by corrosion wear are mostly formed by electrochemical corrosion, and the rate of destruction of metal by chemical corrosion is relatively slow. In order to avoid corrosion and wear, various new processes and methods have been presented in recent years, such as the adoption of anti-corrosion alloys and stainless steels as materials for the whole machine, and the use of carbon-based products as corrosion-resistant materials is even better. In terms of economic and technical concepts, it is often adopted to increase the gold or non-metallic protective layer on the surface of the machine, such as hot dip, electroplating or metal spraying, such as zinc , chromium , nickel , tin , copper , aluminum , Yi multiplexed data lead and other metal on the metal surface, brushing or coating (paint, varnish, mineral oil, petrolatum, white wax solution, etc.) on the whole surface as a coating. The amount of powder contained in the material. The crushers can be divided into medical lithotripters and mining crushers according to the major categories. The principle of mining gravel is suitable for the hard rock crushing of massive mines. Its typical granite discharge granularity is ≤40mm, accounting for 90%. The machine can process materials with side lengths of 100~500mm and its compressive strength is up to 350MPa. The crushing ratio is large, and the material after the crushing has the advantages of cubic particles. Mining gravel machinery refers to a crushing machine with a particle size greater than three millimeters in the discharge, accounting for more than 50% of the total discharge. Balance Frame,Engine Leveler,Engine Hoist Leveler,Engine Lift Leveler WUQIANG HONGMA TOOLS MANUFACTURE CO., LTD , https://www.zjhongma-tool.com
Explain in detail how to effectively prevent corrosion and wear of the crusher?
Crusher machine used in the process, destroying its metal surface in four weeks by chemical and electrochemical medium probation, while also being hit or friction of probation, the probation which was equipped with a machine called a corrupt wear.