From April 8 to April 10, 2013, the 12th China (Shanghai) International Power Equipment and Generator Set Exhibition was held at Shanghai New International Expo Center. Fiat Powertrain Technologies (FPTIndustrial) to bring a variety of high-performance power generation engine debut (E4 Hall 4T020 booth). At the Middle East Power Exhibition in mid-February, Fiat Power Technology received extensive attention due to its high power, low fuel consumption, and small body size. The debut of the Shanghai Power Exhibition also showed that Fiat Power Technology must promote its leading technology in China. At this exhibition, Fiat Power Technologies displayed products including three different configurations of the engine and G-Drive, open and soundproof units, which were particularly noticeable in the G-Drive configuration. Compared with the original products, the new generator product demonstrated by Fiat Power Technology achieved a power increase of 20% in the power stage. Taking the NEF 4.5-liter engine as an example, the previous configuration power of this product can only reach 47kW to 98kW. It is now upgraded to a power range of 52kW to 120kW. The NEF 6.7-liter engine, which matches the mechanical pump injection system, was upgraded to a power range of 156kW to 170kW. The power boost of both engines is attributed to the combustion optimization of high-performance fuel injectors and the calibration of specific fuel pumps. Also based on specific calibration data, the CURSOR series of G-Drive units has been optimized. Now customers only need to select a 300kW 8.7L engine to replace the existing 10.3L engine to achieve the same power target. With a power density of 120 kW and 300 kW, Fiat Power Technology can reach an average of 11% higher than the competition and is the best of the two power segments. For areas where the product's economic performance is high, Fiat Power Technology's engine products are extremely attractive. In addition to the increase in power, the product's optimization in body size and displacement will also bring benefits to customers. For a customer operating a leasing business, products often need to be frequently converted to install locations, or fixed units are installed in confined spaces. The Fiat Power Technology products have relatively obvious advantages. Users can use a 4-cylinder machine instead of a 6-cylinder engine in the 120kW power section or a 8.7-liter engine instead of a 10.3 litre engine in the 300kW power section to achieve the same working results. The G-DRIVE configuration of Fiat Power Technology's power generation engine products is currently designed for installation by major OEMs. Fiat Power Technology can not only provide products for major OEMs, but also provide products, individually customized open or closed units, and configure different bases, motors and control panels. Fiat Power Technology's power generation engine products cover the main applications, including temporary power generation and self-generation, special institutions, factories, and after-sales services. The current major products include the F5, NEF, CURSOR, and VECTOR series covering 31 to 740 kW. Fiat PowerScience production bases are located in France, Italy, Brazil and China. Its power generation engine products are widely used around the world, and its over 1400 sales and after sales service stations throughout the world can meet global customers from sales to after-sales services. Within the various needs. GR (SHANDONG) NEW MATERIAL CO., LTD , https://www.grmaterial-film.com