In the case of running mill, the slurry is discharged from the equipment if it does not meet the requirements. The reasons are as follows: the amount of equipment supplied is too large beyond the capacity of the ball mill, causing the equipment to run out of the slurry. It is recommended to reduce and stabilize the cementing of the cement ball mill and the ratio of return to minerals should be appropriately reduced. The reason why the blockage occurs is because of the fact that the solidification of the slurry in the equipment is not smooth and the slurry can not be discharged smoothly. At this time, the feedstock should be stopped first to increase the solidification ratio of the slurry, which can facilitate the discharge of the slurry. . In the process of making the slurry, excessive mixing of the raw material lime causes adhesion to the wall of the cylinder, which may cause clogging due to difficulty in the abrasive. If the clogging is to stop the feeding, the high-pressure water gun is used to fill the raw material adhered to the wall of the cylinder. The cement ball mill equipment can be operated normally. Moreover, the width of the sieve plate is the cause of blockage of the particles. When the ore is clogged on the sieve plate, the equipment is stopped to clean the ore, and the width of the sieve plate is adjusted to ensure the normal operation of the equipment. In the case of running or blocking, you can solve the situation of the equipment according to the above processing method. I hope the above analysis can help you. Plastics Steel Cylinder Protective Mesh Sleeve Plastics steel cylinder protective mesh sleeve is a type of protective cover that is used to safeguard the plastic or steel cylinders from damage or wear and tear. The protective mesh sleeve is made of high-quality materials that are durable and resistant to wear and tear. The mesh sleeve is designed to fit snugly over the cylinder and provide protection against scratches, dents, and other types of damage. Plastics Steel Cylinder Protective Mesh Sleeve,Poly Net Bags,Poly Mesh Bags,Cheap Mesh Bags Suzhou Yitengjia Extruded Net Packaging Co., Ltd. , https://www.ytjnetbag.com
Benefits of Plastics Steel Cylinder Protective Mesh Sleeve:
1. Protection: The protective mesh sleeve provides protection to the cylinder against damage, scratches, and other types of wear and tear.
2. Durability: The mesh sleeve is made of high-quality materials that are durable and long-lasting. It can withstand harsh weather conditions and rough handling.
3. Easy to install: The protective mesh sleeve is easy to install and can be done by anyone. It does not require any special tools or equipment.
4. Cost-effective: The protective mesh sleeve is a cost-effective solution to protect the cylinder from damage. It is much cheaper than replacing the cylinder.
5. Lightweight: The mesh sleeve is lightweight and does not add any extra weight to the cylinder. It is easy to carry and transport.
6. Versatile: The protective mesh sleeve can be used for both plastic and steel cylinders. It is suitable for a wide range of applications.
Overall, the plastics steel cylinder protective mesh sleeve is an excellent investment for anyone who wants to protect their cylinders from damage and wear and tear. It is a cost-effective and easy-to-install solution that provides long-lasting protection to the cylinder.
How to solve the problem of running and grinding of cement ball mill raw material slurry
Ball mill equipment often has running or blocking in the production and storage of raw material pulp. What are the reasons for this? The two problems are very distressing because the equipment runs and Blocking the grinding will not only affect the production, but also increase the cost of production. How can we solve these problems? Let's take a look at how to solve the problem of running and blocking the cement ball mill.