1. Check if there are any people in the dangerous place. 2. Check if the lubricating oil of each lubrication point of the roller mill is suitable. If it is insufficient, add it. 3. Check whether the filling rate of the steel ball in the roller ball mill meets the requirements. 4. Check whether the bolts of the barrel ball mill grinding body lining bolt, the grinding head and the barrel connecting bolt are loose and securely tightened. 5. Secure the hole cover securely and tightly. 6. Check if there is any leakage of powder in the bolt hole and the inlet hole of the cylinder and eliminate it. 7. When starting the test for the first time or after restarting for a long time, firstly put a small amount of lubricating oil on the hollow bearings at both ends, and grind it with a manual disc for one week, or “jog†for one revolution to confirm that there is no abnormality. 8. Get in touch with the relevant jobs before and after, and get the signal to allow the start to start the mill. (2) The order in which the roller ball mill is started: 1. Start the powder output device. 2. Start the ball mill. 3. Start the feeder. (3) The sequence of the drum ball mill stop: 1. Stop the feeder. 2. Stop the ball mill. Long-term stop grinding should be the steel ball and material blood. 3. The conveyor continues to run until the material on the machine is discharged and then stops.
Clutch friction plate is used in the gearbox of wheel loader. The friction plate of planetary power shift gearbox is divided into inverted active plate, inverted passive plate, direct active plate, direct passive plate, direct active plate inner tooth type (SDLG, XCMG, Liugong, Yutong), Bolt fixed type (XGMA, Lonking, Lovol, Doosan, Yutong, Changlin, Chenggong, etc.)
Transmission Assembly is the core component of wheel loader, consisting of Torque Converter Assembly, transmission assembly, overrunning clutch, including: Torque converter shell, the pump wheels, turbine group, idler pulley, idler pulley, gear, gear, input the secondary gear input level, gear-box, a planetary frame assembly, reverse gear planetary frame assembly, isolation frame assembly, a cylinder, a piston, reverse gear, piston friction plate components, direct transmission assembly, variable speed pump, variable speed valve, etc.
Liugong, SDLG,XCMG,XGMA,Lonking, Shantui, Changlin, transmission assembly structure is basically the same, the internal parts are different, we should pay attention to the selection of accessories
Reverse First Speed Drive Disk,Reverse First Speed Driven Disk,Drive Disk Ass For The Second Speed,Driven Disk For The Second Speed Henan Hanfeng Construction Machinery Co., LTD , https://www.hf-loaderparts.com
How to use the roller ball mill?
(1) Preparation before the roller ball mill starts: