M6 M8 M10 Fasteners Hardware Carbon Steel Auto Spring Round Nut for Furniture

M4 M5 m6 m8 m10 m12 Fasteners hardware Carbon Steel auto spring round nut for furniture

 

 

 

 

 

 

 

M4 M5 m6 m8 m10 m12 Fasteners hardware Carbon Steel auto spring round nut for furniture

 

 

 

 

 

 

 

High Pressure Plastik Welding

Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.

High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com