Marine Docking or Ship Used Yokohama Fender

March 22, 2024

Model NO.: XC20151226007
Engine: 4 Stroke
Engine Type: Outboard
Usage: Ship Launching, Protection, Ship Docking
Certification: ISO9001, CCS, CCC
Feature: Wear-Resistant
Load Capacity: >8000teu
Color: Black
Trademark: xincheng
Specification: according the size
Origin: Qingdao
HS Code: 4016999000
1. Reacting force is samll
2. Large energy absorption
3. Saftey, protection, collision avoidance
4. Easy to be installed
Yokohama fender
D=2.5m L =5.5m
Recation force: 2019KN Energy absorption: 943KJ
The initial pressure is 0.05MPa

Yokohama fender

Specifications of others can be customized according to customer required

Structure of pneumatic rubber fender for ship
Out adhesive: Protective cord layer and inner adhesive have high tensile strength and abrasion resistance.

Cord layer: Strong layer of the pneumatic rubber fender is made from winding the high strength polyamide fibre cord fabric.

Inner adhesive: The cord layer of pneumatic rubber fender assures no gas leakage from the compressor.

End-flange: The end-flange is a part to fix air valve component, buried metal part and the cord layer and used for hoisting, and filling ans discharging gas. The structure of the end-flange is shown in Fig.

Note about applying Pneumatic rubber fender

1. Frenquently check whether the airbag spheroid is damaged and whether the pressure is normal, and the valve core must be replaced every six months.

2. The steel wire should wrap the rubber pipe, when tying steel wire to pneumatic rubber fender in case the the fender is stabbed.

3. The surace or subject next to the pneumatic rubber fender cant be hard and sharp-point in case the fender is stabbed.

4. The accessories and jips nut cant be loose when testing the internal pressure.

5. When applying the pneumatic rubber fender, the rope net should be reliable, the steel wire used for hanging metal parts and the hook link cant be tied in disorder.

Storage of Pneumatic rubber fender

1. When not using for a long time, wash the fender surface, dry up and fill in sufficient right amount of compressed air to lay in a cool, dry and well-ventilated place.

2. The storage place of pneumatic rubber fender should be far away from heat source.

3. Try to keep fender away from acid, alkali, grease and organic solvents.

4. When not applying the fender, the pneumatic rubber fender cant be piled up and heavy itiems cant be piled on the fender.
Size of specification
D*L		 Pressure initially inside
 		 Compression amount
60%		 Maximum pressure inside
 		 Test pressure
 		 Safety valve setting
 		 This weight amount The heavy enclosure of networkconsuits weight
Against
strength		 Suck energy
 



Roller chain Diameter of the roller chain
(mm)*(mm) Mpa KN KN.m Mpa Mpa Mpa kg kg (mm)
500*1000 0.08 84 9 0.174 0.2
26

600*1000 0.08 96 12 0.167 0.2
33

700*1000 0.08 179 25 0.165 0.2
49

1000*1500 0.08 236 47 0.175 0.2
82

1000*2000 0.08 337 66 0.167 0.2
126 308 12
1200*2000 0.08 386 89 0.172 0.2
168 480 12
1350*2500 0.08 554 143 0.175 0.2
226 530 12
1500*3000 0.08 756 215 0.169 0.2
372 616 14
1700*3000 0.08 829 262 0.169 0.2
438 656 14
2000*3500 0.08 1126 424 0.181 0.25
634 736 14
2500*4000 0.08 1817 925 0.163 0.25 0.23 1112 998 16
2500*5500 0.08 2653 1327 0.161 0.3 0.23 1428 1160 16
3000*5000 0.08 2689 1558 0.158 0.3 0.23 2158 2222 16
3000*6000 0.08 3275 1878 0.158 0.3 0.23 3292 2347 16
3300*4500 0.08 3476 1640 0.159 0.3 0.23 3492 2648 19
3300*6000 0.08 3652 2338 0.148 0.3 0.23 3652 2940 19
3300*6500 0.08 3829 2508 0.148 0.3 0.23 3961 4520 19

Pressed Bends

Pressed Bends,Qf Pressed Bends,Fb Pressed Bends,Pressed Bend 90° Short

YANTAI DONGTAI STANDER OFFSHORE ENGINEERING CO.,LTD , https://www.dongtaicolumbus.com