Bearing wear; foreign matter mixed into the bearing; incorrect installation and alignment of the pump; vibrations introduced from the external pipe network; surge. The operation control of the gear grinding machine is a closed control system consisting of a synchronous coupling plate, a control board and a motor. This closed control system is the control core and the start of the motor is related to it. The fault phenomenon is that the grinding wheel and the workpiece motor can start at the same time, but the hydraulic system of the machine suddenly stops working shortly after the operation. Checking from the stoppage of the hydraulic motor, we found that the relay in the control circuit was powered off and the motor power supply contactor was disconnected. This is the direct cause of the failure. The main function of the synchronous coupling plate is to make the output rate of the motor for the two different transmission ratios of the drive chain synchronously increase or decrease continuously variable speed. Its working principle is to output control signals directly to the control board through variable resistors. By comparing the feedbacks of the two motors, the control signals of the control board are automatically fine-tuned to achieve the purpose of motor speed control, and the simultaneous increase and decrease of the rotation speed of the grinding wheel and the workpiece motor is ensured. When the coupling plate is working, the feedback signals of the grinding wheel motor and the workpiece motor are controlled by the logic circuit. When the waveforms of the two feedback signals differ by about a period, the switch is opened and the motor is stopped to protect the equipment. Coupling board operating conditions: After the AC and DC power is fed into the coupling board, the switch on the coupling board should be closed, indicating that the synchronous coupling is ready. When the teleport button is clicked, the DC power is introduced into the coupling plate, indicating that the motor control board is checked correctly. After the work button is pressed, the drive coupling plate sends a start command signal to the two motor control boards to start the motor.
Flying Man Label Die Cutting Line has below advantages: Fast speed, high precision, easy operation, high efficiency and low cost.
This line can assemble hot stamping device, it also calls high speed precision label converting machine with hot stamping punching functions or label hot stamping and Die Cutting Machine.
Flying Man is one professional manufacturer of die cutting machines, Quality Assurance with Factory Price, we're factory Direct Sale.
Label Die Cutting Line,Sticker Die Cutting Production Line,Labe die cutter,Printed Label die cutting machine,hot foil stamping and die cutting machine Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com