Metal C Z Purlin Rolled Forming Machine

February 22, 2024

Model NO.: purlin roll forming machine
Certificate: ISO9001:2000/CE
Power Source: Electric
Feature: Automation
Advantage: Simple Structure
Warranty: 24 Months
Forging Forming Method: Mold Forging
Suitable Material: Q235, Q345, G550 for Gi, PPGI, Gl, PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile, Roof Tile, Corrugated Sheet, Purlin
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
Machine Specification
No.       item Parameter(all is subject to our final design)
1
 		 Suitable raw material Type Common galvanized
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-1.2
width(mm) According to final design
2 Manual uncoiler's capacity 5tons
3 Forming speed(m/min) About 15-22m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around 16-18  groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 5~7tons
Machine's components:
Uncoiler, coil sheet flattening equipment, hole punching department, C/Z shap main forming system, cutting deparment, hydraulic station, PLC control table, final product run out table.

Main technical parameter:
-Suitable raw meterial: Cold rolled strip or heat-treated galvanized steel strip
-Suitable thickness: 1.5-3.0mm
-Forming speed: About 10-12m/min
-Main motor power: 15kw; Hydraulic power: 5.5kw(depend on final design)
-Voltage: 380V, 3 phase, 60HZ or at buyer's requirment
-PLC control and transfered by chain
-Machine's dimension: About 18m*1.8m*1.6m

Meterial of main department:
-Forming roller: Cr15 bearing steel with quenched treatment
-Cutting blade: Cr12 mould steel with quenched treatment

Working flow:
Uncoil the strip-guiding and flattening the sheet-hole punching-main roll forming-cutting-final products run out to table

Amino Acid

Amino Acid,L-alanine,L-methionine,L-valine

Amino Acid,L-alanine,L-methionine,L-valine

Jiangsu Kaihuida New Material Technology Co., Ltd , https://www.khdchemical.com