1) Newly put into use the pump, usually after 100 hours of operation to be replaced grease (oil), after every 500 hours of operation to replace 1. Precipitated Calcium Carbonate
Uses: Can be used as filler in rubber, plastics, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. It can also be used as a medium seeding agent for industrial waste water, a antacid for stomach and duodenal ulcers, a detoxifying agent for acidosis, a SOâ‚‚ eliminating agent in SOâ‚‚-containing exhaust gas, a dairy cattle feed additive and an anti-sticking agent for oil felt . It can also be used as a raw material for tooth powder, toothpaste and other cosmetics.
Usually used as a filler, widely used in daily chemical industries such as artificial floor tiles, rubber, plastics, papermaking, coatings, paints, inks, cables, construction supplies, food, medicine, textiles, feed, toothpaste, etc., as a filler to increase products The volume is reduced, and the production cost is reduced. Precipitated Calcium Carbonate,Precipitate Calcium Carbonated Powder,Precipitated Calcium Carbonate Manufacturers,Activated Precipitated Calcium Carbonate Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com
2) The use of grease lubricated bearings, running 1500 hours, you should replace the grease, filling the oil can not be too much or too little, because too much or too little grease will cause the bearing heat, the amount of fuel generally in the Bearing chamber volume of 1/2 ~ 2/3 is appropriate.
3) For bearings lubricated with oil, the amount of oil should be added to the specified position.
4) Sheng lubricating oil or grease container should be clean, usually should be sealed, there should be no dust, iron filings and other debris, so as not to damage the bearings.
5) Motor bearings generally use sodium-based grease, this grease is characterized by high temperature (125 ℃), but easily soluble in water, it can not be used for pump bearing lubrication.
Light Calcium Carbonate is made of limestone, and can be used in daily chemical products such as tooth powder, toothpaste, cosmetics, etc. It can also be used in organic synthesis, metallurgy, glass and asbestos production.
The particle size of light calcium is smaller than that of Heavy Calcium Carbonate, the oil absorption is larger than that of heavy calcium carbonate, and the price is higher than that of heavy calcium carbonate. They are all commonly used fillers in latex paint, and they are best used together. Light calcium is better in terms of sedimentation, but its oil absorption is greater than that of heavy calcium, and the price is generally more expensive than heavy calcium. Although it is not as stable as heavy calcium, it is stable. Even for exterior wall paint, its application amount is also very large. of.