As one of the professional vehicles in the petroleum industry, the oil fracturing truck works on the principle that a large number of professional liquids under high pressure are used to press open rock layers to form cracks, and proppant is poured into the joints. This will increase the oil infiltration and eventually increase the oil production. Its mechanical composition has four major cores, among which the fracturing pump core system is the main body of the oil fracturing vehicle. With regard to the current new trends in energy extraction, with more scientific and rational development of technological innovations, the performance requirements for oil fracturing vehicles will also increase. Oil fracturing vehicles must be equipped with a variety of properties such as anti-wear and anti-corrosion high pressure. Therefore, maintenance operations on oil fracturing vehicles are also important. First, do a good job of fracturing pump system cleaning and maintenance. Fracturing pumps are the core components of oil fracturing vehicles. Daily cleaning and maintenance should be comprehensive and meticulous. Daily check and cleaning of the internal components from the valve cover of the pump body. For easy-to-lose components should always change constantly. At the same time, the working energy oil should also be replaced and replaced in a timely manner. Second, do a good job every day parts of mechanical and mechanical oil inspection. Check the accuracy of the mechanical instrument. Check that the lubricating oil of each core component is sufficient to prevent mechanical damage. The hydraulic system should check whether the hydraulic oil is in the standard range. Under low temperature conditions, it is also necessary to check whether antifreeze is added in a timely manner. Third, do daily mechanical fastening and anti-corrosion work. Check whether the mechanical components are firmly connected or not and always tighten them. Do not leak. Timely release of mechanical work is the production of various waste liquids and condensate to prevent mechanical corrosion. Fourth, do a good job daily connection seal rust inspection. In some of the valve chamber, pressure sensor connection or pressure tube, pressure tube elbow at the place to do anti-rust oil work. Sealed, but also to conduct a corresponding seal inspection. Fifth, make daily records of daily maintenance. For the problems that arise during the maintenance process, all the solutions that have been resolved and not yet resolved should be detailedly registered in the daily maintenance log book to form a clear record of the actual maintenance of the vehicle. In order to improve the efficiency and accuracy of detection problems after the vehicle inspection. Clutch Slave Cylinder For TRACTOR ZHEJIANG BENTENG INTELLIGENT BRAKE SYSTEM CO.,LTD , https://www.cnnakol.com