Pharmaceutical Centrifuge (PSLQ)

March 17, 2024

Model NO.: PSLQ
Warranty: 1 Year
Trademark: FULIDA
Transport Package: Wooden Case or Plastic Film
Origin: China
HS Code: 8421192000
Pharmaceutical Centrifuge (PSLQ)
 Pharmaceutical Centrifuge (PSLQ)


PRODUCT CHARACTERISTICS & USAGE
The PSLQ/PSFQ series centrifuge is a piece of flat plate type clean filtering equipment with intermittent operation. The materials enter the bowl from the feeding pipe on the closed housing. Under the action of centrifugal force, the liquids are discharged outside the machine after passing through the filter media. The solids are retained in the bowl and discharged from the top when the cover is opened after the machine stops. The cover can be turned totally at a turning angle higher than 90° through manual, hydraulic driving or pneumatic driving mode, so that all the parts of the bowl are exposed, making it convenient to carry out discharging, cleaning, filter bag replacement, etc. The whole machine is manufactured in accordance with the requirements in GMP and FDA. It is subject to polishing treatment without any dead corner. The PSFQ model centrifuge adopts motor direct driving and avoids dust that may be caused by triangular belts and mechanical braking. It is especially suitable for inflammable, explosive and poisonous applications.
 
STRUCTURE & PRINCIPLE
It is widely used for separation and dehydration of suspensions containing solids of middle or fine granularity such as food additives, chemical condiments, MSG, pesticides, antibiotics, pharmaceutical intermediates, vitamins, Chinese patent medicines, activated carbon, dye intermediates, pigments, etc. in pharmacy, light industry, food, chemical industry, etc.
 
 
PSLQ/PSFQ STRUCTURAL DIAGRAM OF PSLQ/PSFQ MODEL FLAT PLATE DIRECT-CONNECTED TOP DISCHARGE CENTRIFUGE
 Pharmaceutical Centrifuge (PSLQ)

1. Damping shock absorber
2. Flat panel base
3. Manual housing turning device
4. Shell
5. Bowl part
6.Small flap locking device  
7. Small flap
8. Oblique sight glass
9. Washing pipe
10. Feeding pipe
11. Small flap turning device
12. Housing locking device   
13. Motor
14. Spray ball
15. Nitrogen-filled tube
16. Mother liquor outlet
17. Explosion-proof lamp
 Pharmaceutical Centrifuge (PSLQ)


1. Damping shock absorber
2.Flat panel base
3. Direct-connected motor
4. Manual housing turning device
5. Shell
6. Bowl part  
7. Washing pipe
8.Small flap locking device
9.Small flap
10. Oblique sight glass
11. Feeding pipe
12. Small flap turning device  
13. Housing locking device
14. Nitrogen-filled tube
15. Mother liquor outlet
 
PSLQ/PSFQ TURNING WORK STRUCTURAL DIAGRAM OF PSLQ/PSFQ MODEL FLAT PLATE DIRECT-CONNECTED TOP DISCHARGE CENTRIFUGE
Pharmaceutical Centrifuge (PSLQ)
 

Vacuum Forming Plastic

Vacuum-formed plastic is used to produce a variety of custom design parts.Vacuum forming become to be a popular and cost-effective solution for a wide range of plastic forming needs.


The product's application must be taken into consideration while selecting the material. Normal vacuum forming plastic included:Polyester, HDPE, LDPE, PVC,PETG,polypropylene, polystyrene, ABS, acrylics, polycarbonate, ASA as well as other ABS capped acrylic and ABS capped polycarbonate.


ABS plastic also named Acrylonitrile Butadiene Styrene,is the most widely used in vacuum forming and available in a range of textured, smooth and embossed finishes, offered in virgin, recycled,UV resistant and flame retardant grades(UL94-V0). As good impact resistance ABS usually is vacuum formed for vehicle,equipment,plastic tray and so on industrial.


HIPS plastic also named High Impact Polystyrene ,is most used in Point of Sale (POS), display and signage market due to its visual appearance (colour options, gloss level, texture), the ease with which it can be processed along with its antistatic and electrical conductivity.


HDPE plastic also named High-Density Polyethylene,is widely used in indoor and outdoor applications including bottles, playground equipment packaging and furniture. It is a plastic with high tensile strength, and good chemical and corrosion resistance.And it has properties of recycling,UV stabilised, improved impact resistance.


PP Plastic also named Polypropylene,is similar to PE. But PE is more harder more heat resistant.But PP is more durable.Mostly plastic tray is produced by PP plastic.


PMMA plastic also named acrylic or glass fiber.It has properties of tensile strength, transparency, polishability and UV tolerance but less impact strength.It is available in clear, antiglare, opal, white, and frosted.It is best choice for windows, displays or see-through enclosures.


PETG named Polyethylene Terephthalate Glycol is another clear rigid plastic sheet.PETG is easily vacuum formed, printed, bonded and polished. As its' excellent clarity and impact resistance, it is widely used in outdoor application.


PC named polycarbonate, has combined advantage of PMMA and ABS. Usually is transparency and semi- transparency. It is expensive but that is best choice for clear plastic vacuum forming.



ASA is one new material which has all good properties of ABS. But much good UV resistant for outdoor usage. It usually be used for radome,air conditioning housing etc outdoor products.



Meanwhile, ABS capped acylic combined the good properties of ABS and acylic. ABS capped polycarbonate combined the good properties of ABS and polycarbonate.If you need high glossy surface for your design,then this is your only choice.










Vacuum Forming Plastic,ABS Vacuum Forming,Polypropylene Vacuum Forming,HDPE Vacuum Forming,Polystyrene Vacuum Forming

Dongguan Yiyongli Industrial Co.,Ltd. , https://www.dgthermoforming.com