
Technical data:
Fluid Pressure | Max 1.6MPa (232Psi) |
Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
Control Fluid | Neutral gas, air |
Body Material | CF8M/CF8 |
Seals  Material |  EPDM/FKM |
Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
Fluid Temperature | -20ºC - +150ºC |
Ambient Temperature | -20ºC - +80ºC |
Control Type | Normally closed,Normally open,Double acting |
Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:

CONTACT US:


Technical data:
Fluid Pressure | Max 1.6MPa (232Psi) |
Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
Control Fluid | Neutral gas, air |
Body Material | CF8M/CF8 |
Seals  Material |  EPDM/FKM |
Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
Fluid Temperature | -20ºC - +150ºC |
Ambient Temperature | -20ºC - +80ºC |
Control Type | Normally closed,Normally open,Double acting |
Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:

CONTACT US:

The chain grate is the combustion equipment of coal-fired steam boiler. There are three main types and structures: chain belt grate, scale grate and beam grate.
1. Chain belt grate. The chain belt grate is a wide circular chain belt which is surrounded by and supported on the the front and rear axles via the chain wheels. At present, ZOZEN packaged chain grate steam boiler mainly adopts the large-block chain belt grate with a capacity of 1-20 tph.
2. Scale grate. The scale grate has many advantages. The obvious one is that there is less coal leakage. The scales can be replaced without shutting down the boiler. The ventilation is balanced, and the ventilation section is relatively small (6%). The chain grate bars only bears the stress or high temperature instead of both of them, which improves the working conditions of the chain grate.
3. Beam grate. Its main feature is that the width and length of the grate can be extended in a wide range, and the tonnage of the boiler can be larger. At present, the tonnage of the domestic beam chain grate steam boiler can reach 240 tph. The grate is featured with long service life, good durability, smooth arrangement and convenient replacement.
Chain Grate Boiler,Travelling Grate Boiler,Travelling Grate,Step Grate Boiler
Jinan Yuanda Power Equipment Co.,Ltd. , https://www.ydboilerpart.com