Punch correct operation steps

How should the punch be operated correctly?

1. The puncher must learn, master the structure and performance of the equipment, be familiar with the operating procedures and obtain the operation permission before operating independently.

2. Proper use of the safety protection and control devices on the equipment shall not be dismantled.

3. Check whether the transmission, connection, lubrication and other parts of the machine tool and the protective safety device are normal. The mold screws must be firm and must not be moved.

4. The machine should be emptied for 2-3 minutes before work, check the flexibility of the control device such as the foot brake, and confirm that it can be used after normal operation.

5. When the mold is tight, the upper and lower molds are aligned, and the position is correct. The machine is moved by hand to test (empty), to ensure that the mold is working under good conditions.

6. Pay attention to lubrication before driving, and remove all floating items on the bed.

7. When punching or running, the operator should stand properly, the hand and head should be kept at a certain distance from the punch, and always pay attention to the punch action, and it is strictly forbidden to chat with others.

8. When punching or smashing short workpieces, apply special tools and do not directly feed or take them by hand.

9. When punching or squeezing long-body parts, safety racks should be set or other safety measures should be taken to avoid damage.

10. When single punching, hands and feet are not allowed to be placed on the hand and foot brakes, and must be moved once (step) to prevent accidents.

11. When two or more people work together, the person responsible for moving (treading) the brakes must pay attention to the action of the feeder. It is strictly forbidden to take the parts while moving (step).

12. Stop at the end of the work, cut off the power, wipe the machine, and organize the environment.