On the afternoon of September 16, at the plenary session of the Global Automotive Forum on the topic of “thinking about the green futureâ€, Xiao Guopu, vice president of Shanghai Automotive Industry (Group), explained the development path of SAIC New Energy Vehicles. He said that by 2012, SAIC will introduce 20,000 pure electric vehicles and plug-in hybrid vehicles to the market. "Now we must establish a new energy vehicle industrialization base to prepare for the future development." Xiao Guopu said that SAIC Group aims at the trend of electric vehicles, accelerate the industrialization of hybrid and electric vehicles, and actively promote the development of fuel cell batteries Upgrade and demonstration run. With the opportunity of the World Expo, SAIC Group has made clear the development goals of new energy vehicles: In 2010, SAIC's medium-power hybrid cars were put into operation; in 2012, SAIC Roewe 550 plug-in strong-mix cars were listed and its own brand pure electric vehicles were introduced to the market. From 2010 to 2012, SAIC will build 20,000 pure electric vehicles and plug-in hybrid vehicles. Among the 1,100 new energy vehicles provided by SAIC to the Shanghai World Expo, there are various types of electric vehicles, hybrid vehicles, fuel cells, and super capacitor cars. Xiao Guopu said that the new energy vehicles provided by the SAIC Group have performed very well at this year's World Expo. Until now, the total attendance rate of all models has reached 97%, and the good rate has reached more than 99%, even exceeding the running quality of traditional buses.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
The role of edge banding: PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com
First, the edge banding has the function of blocking harmful gases such as formaldehyde
Good edge banding or multi-sided edge banding can reduce the amount of formaldehyde emission per unit time (ie, slow down the emission rate). It is worth noting that edge banding will not reduce the formaldehyde content of the board, but this has the advantage of edge banding. It can reduce the formaldehyde emission per unit time of unenvironmentally-friendly sheets to a level that is acceptable to humans and does not affect health.
Second, the role of beautifying furniture
Good edge banding has the effect of beautifying office furniture, but if it is to be beautiful, the requirements for edge banding will be higher. Not only must the edge banding and the end surface of the board be firmly and smoothly combined, but also that the edge banding must be combined with other The joints of the surfaces should not have defects such as bottoming, chipping, and large gaps, and the transition should be natural, smooth and smooth.
Third, extend the service life of office furniture
The precise edge sealing design of the board can prevent water or other liquids from entering the board, avoiding the expansion, deformation and breeding of bacteria on the desktop, thereby prolonging the service life of the office furniture, and the office furniture after the edge sealing treatment is also more expensive in terms of cleaning easy.
Fourth, avoid sharp edges and corners from hurting people's bodies
The general edge banding will use the dull edge banding design to smooth the corners of the table, thereby reducing the damage to the body by the sharp corners