The trends of the Metal Scrap recycling industry
By baling the products, the volume of metal scrap is greatly reduced, often up to seventy-five per cent.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
CONTACT YMSRECYCLING
Manual Metal Baler,Manual Waste Metal Baler,Manual Metal Baling Press,Manual Metal Recycling Baler Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com
Technical Information for Parallel Twin Screw Barrel
Main Base materials
1.38CrMoAlA (SACM645)
Main Alloy Materials
1. Ni-based alloy/Deloro alloy
2. SKD-61 (Special Tool Steel)
2. Tungsten carbide/Wolfram carbide
3. 42CrMo (Ultrahigh StrengthSteel)
3. NiCo-based alloy
4. DC53 (Cold WorkDie Steel)
4. Fe-based alloy
5. W6Mo5Cr4V2 (High-SpeedToolSteel)
5. Co-based alloy
Processing Technics
1. Heat treatment
Technical parameters
Nitriding layer depth:0.5-0.8mm
2. Quenching
Nitrided hardness:900-1000HV
3. Nitriding treatment
Bimetallic layer depth:3 mm
4. Bimetallic alloy welding for screw
Bimetallic hardness:57~69HRC
5. Bimetallic alloy centrifugal casting for barrel
Hard-chrome plating hardness after nitriding:≥950HV
6. Hard-chrome electroplating
Chrome-plating layer depth:0.03-0.09mm
Linearity of screw:0.015mm
Surface roughness:Ra 0.4
The most common types of conical twin screw barrel extruder
types of screw (d/D)
length of work(mm)
quantity ofextruder(kg/h)
speed of screw rotate(rpm)
Φ35/77
810
40-70
5~50
Φ45/99
990
50-80
5~45
Φ51/105
1070
100-150
4~45
Φ51/105
1220
100-150
4~45
Φ55/110
1220
120-180
4~40
Φ60/125
1320
150-200
4~40
Φ65/120
1440
200-250
4~40
Φ65/132
1440
200-250
4~40
Φ70/140
1460
220-300
4~40
Φ75/150
1480
250-320
4~35
Φ80/143
1660
300-360
4~35
Φ80/156
1800
300-360
4~35
Φ90/184
2000
400-500
3~35
The most common types of parallel twin screw barrel extruder
D35/5
D45/2
D50/2
D60/2
D65/2
D70/2Â Â
D72/2
D75/2
D80/2
D85/2
D90/2
D93/2
D100/2
D105/2
D110/2
D115/2
D120/2
D125/2
D130/2
D140/2
D150/2
D160/2
D170/2
D180/2
D190/2
D200/2
D200/2
D250/2
Screw types:
Gradual change, chop, barrier, distributary, separate, air exhausting, pin, mixing and etc.
For good plasticizing effect, we have different design of screw barrel to meet customer's demand.
Specification :
Dia 20mm-250mm; L/D=15-45
Scope of Application:
1. Generally plastic material
2. Pipe/ Profile/ Sheet/Pelletizing
3. WPC, ABS, TPR, TPU, PMMA, C-PVC, UPVC, RPVC, PET, EVA, PU,PE etc
Treatment:
Nitrized, Chrome coating, Quenching, Bimetallic
We are foucs on each process to make sure each screw barrel is qualified according to technical requirement. 
Packaging Details:
1. Be brushed anti-corrosive oil on extruder machine single screw.Â
2. Packed with film.Â
3. Packed in the AA wooden.
Please provide samples or requirements about dimensions and tolerances of , semi-finished and finished products, the equipment, the monthlly comsumption quantity, the current screw and barrel you are using, HRC and so on.
For more information, please kindly contact as below:
Mobile: 0086-13917356326
Technical Information for Parallel Twin Screw Barrel
Main Base materials
1.38CrMoAlA (SACM645)
Main Alloy Materials
1. Ni-based alloy/Deloro alloy
2. SKD-61 (Special Tool Steel)
2. Tungsten carbide/Wolfram carbide
3. 42CrMo (Ultrahigh StrengthSteel)
3. NiCo-based alloy
4. DC53 (Cold WorkDie Steel)
4. Fe-based alloy
5. W6Mo5Cr4V2 (High-SpeedToolSteel)
5. Co-based alloy
Processing Technics
1. Heat treatment
Technical parameters
Nitriding layer depth:0.5-0.8mm
2. Quenching
Nitrided hardness:900-1000HV
3. Nitriding treatment
Bimetallic layer depth:3 mm
4. Bimetallic alloy welding for screw
Bimetallic hardness:57~69HRC
5. Bimetallic alloy centrifugal casting for barrel
Hard-chrome plating hardness after nitriding:≥950HV
6. Hard-chrome electroplating
Chrome-plating layer depth:0.03-0.09mm
Linearity of screw:0.015mm
Surface roughness:Ra 0.4
The most common types of conical twin screw barrel extruder
types of screw (d/D)
length of work(mm)
quantity ofextruder(kg/h)
speed of screw rotate(rpm)
Φ35/77
810
40-70
5~50
Φ45/99
990
50-80
5~45
Φ51/105
1070
100-150
4~45
Φ51/105
1220
100-150
4~45
Φ55/110
1220
120-180
4~40
Φ60/125
1320
150-200
4~40
Φ65/120
1440
200-250
4~40
Φ65/132
1440
200-250
4~40
Φ70/140
1460
220-300
4~40
Φ75/150
1480
250-320
4~35
Φ80/143
1660
300-360
4~35
Φ80/156
1800
300-360
4~35
Φ90/184
2000
400-500
3~35
The most common types of parallel twin screw barrel extruder
D35/5
D45/2
D50/2
D60/2
D65/2
D70/2Â Â
D72/2
D75/2
D80/2
D85/2
D90/2
D93/2
D100/2
D105/2
D110/2
D115/2
D120/2
D125/2
D130/2
D140/2
D150/2
D160/2
D170/2
D180/2
D190/2
D200/2
D200/2
D250/2
Screw types:
Gradual change, chop, barrier, distributary, separate, air exhausting, pin, mixing and etc.
For good plasticizing effect, we have different design of screw barrel to meet customer's demand.
Specification :
Dia 20mm-250mm; L/D=15-45
Scope of Application:
1. Generally plastic material
2. Pipe/ Profile/ Sheet/Pelletizing
3. WPC, ABS, TPR, TPU, PMMA, C-PVC, UPVC, RPVC, PET, EVA, PU,PE etc
Treatment:
Nitrized, Chrome coating, Quenching, Bimetallic
We are foucs on each process to make sure each screw barrel is qualified according to technical requirement.Â
Packaging Details:
1. Be brushed anti-corrosive oil on extruder machine single screw.Â
2. Packed with film.Â
3. Packed in the AA wooden.
Please provide samples or requirements about dimensions and tolerances of , semi-finished and finished products, the equipment, the monthlly comsumption quantity, the current screw and barrel you are using, HRC and so on.
For more information, please kindly contact as below:
Mobile: 0086-13917356326
Recycled scrap consists of 58% of post-consumer products that are considered to be obsolete or outdated. 24% of this material is prompt scrap, which is produced in manufacturing plants that create steel. 18% of the industry involves home scrap, which is produced by current operations.
Steel and aluminum can be infinitely recycled. Scrap metal consists of ferrous metals or nonferrous metals. Large items such as cars, dishwashers, washing machines, stoves, and refrigerators are generally created from metal and therefore the best items to recycle.
By reducing the volume in this way, the smelting costs are reduced. In addition, the overall process of recycling and re-casting can be done more quickly.
Manual Metal balers are economically and environmentally beneficial in reducing metal waste. They lower costs, are space-efficient and make transporting the materials much easier.
The Manual Metal Baling press makes your metal recycling more efficient and profitable.
The Y81 series Manual Waste Metal Scrap Baler could not only press all non-ferrous metals such as copper, brass, and aluminium can be recycled as well as ferrous metals from steel to stainless steel, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.
Call us now on +86-15950122559
To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
SKD61 Bimetallic Parallel Twin Screw Barrel for WPC Extrusion Machine
Model NO.: GMT-Screw
Nitrided Depth: 0.5-0.8mm
Surface Roughness: <=Ra0.4
Trademark: GMT
Transport Package: AA Wooden Case
Specification: Customize
Origin: China
HS Code: 84779000
Model NO.: GMT-Screw
Nitrided Depth: 0.5-0.8mm
Surface Roughness: <=Ra0.4
Trademark: GMT
Transport Package: AA Wooden Case
Specification: Customize
Origin: China
HS Code: 84779000