Structural floor board tile press - steel concrete composite structure construction sequence (1) Clean the surface of steel clear, according to the plate steel floor figure welding on the steel beam (2) according to the welding procedure and welding the steel plate on the steel beam;
The take-up machine,SG800 take-up machine adopts shaft-less type pneumatic to top,winding displacement use dia 50 polish rod strand oscillator,spool size by customer,step-less speed regulation.we can make the trunk take up machine,spool take up machine,the each motor is 11KW,
The first Safety precautions for LZ600 wire drawing machine+take up machine
1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.
1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.
1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.
The second Delivery inspection
2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.
2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.
2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.mc
The third technical indicators
We can make take up machine,wire drawing machine,layer winding machine,drum packing machine,flux cored forming machine
spooling machine,winding up machine,steel wire take-up machine Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.comQuick Details
Condition:Â New Type:Â Tile Forming Machine Tile Type:Â Steel Use:Â Floor Production Capacity:Â 10-15m/min
(3) the fit between diamond support plate fixed by a clamp;
(4) use welding gun to fixed the composite beam
(5) according to design requirements to tie steel mesh
(6) the concrete pouring
Â
Steel Metal Deck Floor Roll Forming Machine
Model NO.: 750
Automatic Grade: Automatic
Product Type: Steel Floor Deck Roll Forming Machine
Model Number: 750
Power: 7.5kw
Warranty: 1year
Voltage: 380V 50Hz 3phase
Tile Type: Steel
Trademark: poxuen
Transport Package: 14500mm*1500mm*1300mm
Specification: 14.5T
Origin: China