Like "Wandering Earth", the excavator unexpectedly ignited a fire in 2018, setting a new record with a total sales volume of 203,000 units! Of the 203,000 units sold, 5 ≤ a ≤ 6 tons contributed the most, accounting for more than 24%, which means that for every four excavators sold in the market, one of them belongs to this ton! Therefore, if you want to seize the opportunity and start an exciting excavator to create wealth, buy a small excavation of 5 ≤ a ≤ 6 tons is undoubtedly a very safe choice! Today, the editor of China Construction Machinery Trading Network recommends a strength of 5 ≤ a ≤ 6 tons - Wacker Neuson ET60 excavator! Wacker Neuson ET60 excavator Wacker Neuson, from Germany, is a household name for centuries at the other end of Eurasia. Compared to other excavator brands, Wacker Neuson specializes in small equipment for the production of small micro-digging and paving machinery. In 2018, it ranked 22nd in the global construction machinery rankings, and was the only small-digging manufacturer on the list. Ranked 22nd in the global construction machinery rankings in 2018 This ET60 excavator is a new generation of small products launched by Wacker Neuson for the Chinese market. It is a fine tradition of German precision manufacturing, deeply combined with the Chinese market and user needs, and carefully designed for Chinese users. Small digging products. Rich German blood, the pursuit of quality in the past 170 years, is destined to the extraordinary strength of ET60! Strong, durable, no fear of harsh environment The ET60 excavator is equipped with a Yanmar 4TNV94L direct-injection 4-cylinder high-efficiency engine with powerful dynamic performance; Bosch Rexroth main valve and variable displacement hydraulic pump, combined with Bosch Rexroth LUDV load-sensing system, optimize compound action, low fuel consumption Under the conditions, the smooth and powerful operation performance, efficient, fast and smooth response to the operating environment under a variety of complex conditions. Equipped with Yanmar 4TNV94L engine Equipped with Bosch Rexroth main valve compressor The main components are made of high-strength and lightweight steel. The overall structure is reinforced. The reinforcement plate is added in the area where the force is strong. The stress is tested to enhance the durability of the large and small arms. The 400mm steel track is equipped as standard, and the X-shaped structure is adopted. The entire equipment is safer, more reliable and durable. Reinforce the durability of the arms Standard 400mm steel track, X-shaped frame The side-mounted fixed boom design makes the whole machine more powerful and powerful. Side fixed boom design The above design allows the ET60 excavator to undertake a variety of high-load working environments, even in the harsh environment of high altitude, dust, high temperature, etc. It can also perform excellently under heavy load conditions. Comfortable, safe and easy to maintain The ET60 cab is newly designed with good sealing, low noise, low vibration and isolation from high temperature areas. It is designed with 6 adjustable air outlets, optimized air circulation circulation, excellent cooling effect and comfortable working environment. New design of the cab, good sealing The cab is ergonomically designed with a wide field of view with no obstruction, 360° and no dead angle, making it safer and safer to operate. Good view, 360° no dead angle Simple operation, at a glance ET60 maintenance work saves time and effort through exquisite and rigorous internal design and external structure – Maintenance work saves time and effort The cyclone air filter system reduces dust entering the air filter, and the air filter replacement cycle is extended from 500 hours to 1000 hours, effectively reducing the cost of service parts. New metal cover opens at a large angle for easy maintenance The main components are designed reasonably and easily accessible The new metal cover is opened at a large angle, and the radiator drain valve, fuel filter, oil-water separator and fuel tank drain valve are designed to be easy to reach; the slewing bearing lubricates the front of the nozzle for easy maintenance; the heavy-duty bushing is used for daily lubrication. Lubrication devices, etc., all of which effectively improve the convenience of the service. Efficient, low-cost, user-preferred construction The Wacker Neuson ET60 is a standard tail excavator with an operating weight of 5.7 tons. It is also specially developed for the 5.5-ton excavator on the market, but it is larger in size (length, width and height) than other brands. As we all know, the excavator is settled in the tonnage market according to the tonnage, so in theory, the choice of products with larger tonnage can get a higher construction unit price. Main parameters of ET60 excavator Look at the other. The ET60 excavator has a maximum working radius of 5958mm, a digging depth of 3727mm, a digging force of 36.3kN, and a bucket capacity of 0.22m3, which can effectively cope with wide, deep and large engineering operations. At the same time, the ET60 uses a large-capacity fuel tank of up to 109L, which makes the working time longer and more work. The fuel consumption is lower and more economical and practical under the same working conditions. Excavation depth 3727mm 0.22m3 large capacity bucket The ET60 excavator is designed and developed by Wick Neuson for the needs of the Chinese market. It is designed to cope with the growing urban infrastructure construction, new rural construction, basic water conservancy and earthwork operations in complex environments, whether it is excavation, loading or small. The dozing work can easily cope with the excellent performance and meet the value needs of users. More durable, more reliable, less expensive and more efficient! This is the Wacker Neuson ET60 excavator that is “different†because of German descent! Wacker Neuson ET60 excavator It is not to be missed that Wacker Neuson is launching a new machine test drive in conjunction with the China Construction Machinery Trading Network. The current activities are in full swing and interested users are welcome to sign up. All registered participants have the opportunity to receive exquisite gifts and draw awards such as jackets and business backpacks. Scan the QR code in the picture to open a passionate journey of inspiration! Alnico (AlNiCo) is the first developed a permanent magnet is made of aluminum, nickel, cobalt, iron and other trace metals composition of an alloy.According to different production process is divided into sintered Alnico (Sintered AlNiCo), and cast aluminum nickel and cobalt (Cast AlNiCo).Product shape of the round and square. Sintered products limited to the small size, their production out of rough tolerance is better than the rough cast product can be better workability. Alnico Magnet,Alnico Magnets,Alnico V Magnets,Alnico Rod Magnets,Alnico 3,Alnico 5 Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com
This article belongs to China Construction Machinery Trade Network () original, if you need to reprint, you must indicate the source in the form of a hyperlink, it is strictly forbidden to modify any original text.
Alnico alloys can be magnetised to produce strong magnetic fields and have a high coercivity (resistance to demagnetization), thus making strong permanent magnets. Of the more commonly available magnets, only rare-earth magnets such as neodymium and samarium-cobalt are stronger. Alnico magnets produce magnetic field strength at their poles as high as 1500 gausses (0.15 teslas), or about 3000 times the strength of Earth's magnetic field. Some brands of alnico are isotropic and can be efficiently magnetized in any direction. Other types, such as alnico 5 and alnico 8, are anisotropic, with each having a preferred direction of magnetization, or orientation. Anisotropic alloys generally have greater magnetic capacity in a preferred orientation than isotropic types. Alnico's remanence (Br) may exceed 12,000 G (1.2 T), its coercivity (Hc) can be up to 1000 oersteds (80 kA/m), its energy product ((BH)max) can be up to 5.5 MG·Oe (44 T·A/m). This means that alnico can produce a strong magnetic flux in closed magnetic circuits, but has relatively small resistance against demagnetization. The field strength at the poles of any permanent magnet depends very much on the shape and is usually well below the remanence strength of the material.
Alnico alloys have some of the highest Curie temperatures of any magnetic material, around 800 °C (1,470 °F), although the maximal working temperature is normally limited to around 538 °C (1,000 °F).[4] They are the only magnets that have useful magnetism even when heated red-hot.[5] This property, as well as its brittleness and high melting point, is the result of the strong tendency toward order due to intermetallic bonding between aluminium and other constituents. They are also one of the most stable magnets if they are handled properly. Alnico magnets are electrically conductive, unlike ceramic magnets.
Alnico magnets are widely used in industrial and consumer applications where strong permanent magnets are needed; examples are electric motors, electric guitar pickups, microphones, sensors, loudspeakers, magnetron tubes, and cow magnets. In many applications they are being superseded by rare-earth magnets, whose stronger fields (Br) and larger energy products (BHmax) allow smaller-size magnets to be used for a given application.
The strength of the small digging! Interpretation of Wacker Neuson ET60 Advantage
Related News: Wacker Neuson Excavator Demand
Copyright Notice: