The weightlifting barbell bar is designed for the clean & jerk and snatch Olympic weightlifting competitions. It has a smaller diameter (28mm) and has more elastic energy storage. Standard Barbell Bars,Olympic Weightlifting Barbell Bar,Barbell Solid Threaded Bar,Weightlifting Training Bar,Standard Straight Barbell Bar SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.js-luggagecarts.com
2. Before starting up, operators should wear protective glasses and wear work clothes.
3. Before working, check the installation of the saw blade and the quality of the saw blade.
4. Before working, check whether the protective cover and belt protective plate of the saw blade are fixed and reliable.
5. The hanging saw machine should adjust the upper weight according to the size of the saw blade, so that the saw blade is stabilized behind the workbench, and one saw blade hurts the human body.
6. When operating, put the wood against the board, for a good length, and then press the material with your right hand. The left hand steadily pulls the saw blade and cuts the material. After the cut, slowly let go and the saw blade returns to its original position.
7. When the saw is in operation, the person must stand on the right side of the saw blade.
8. Do not yank the saw blade during operation. When the saw blade is stuck, the switch should be pulled immediately. When the saw blade is pushed out, the saw blade should be put back slowly. Otherwise, the saw blade swings too much and it is dangerous.
9. When the belt is on the oil, it should be stopped. Push the belt by hand to evenly apply. It is forbidden to change the oil.
10. When turning or stopping the saw blade, it is strictly forbidden to use any object brake card to press the saw blade. The saw blade should be stopped naturally. It is forbidden to use both hands to pull the material straight to the saw blade.
11. After the work is completed, it should be the circumstances of the machine, the workbench and the surrounding venue. Fill in the relevant records carefully.
Woodworker cutting saws operating procedures
1. The operator can obtain the operation certificate only after passing the examination. The operator should be familiar with the performance, structure, etc. of the machine. The patient should comply with the safety and handover system.