Two
Production Processes
1,Stainless
steel wire mesh stamping,pressing,the edge with metal sheet or rubber injection
molding.
2,
stainless steel wedge wire wound wire.
The
use of Stainless Steel Wire Mesh filter cap produced by different processes is
not the same.
The
stainless steel filter cap is mainly used in mechanical parts to filter
impurities in oil. Suitable for all kinds of fuel filtration, water
treatment industry equipment filtration.
Stainless
steel filter cap is widely used in the filter soda water backwashing system and
softening water combination, back program, pressure ion exchanger, mechanical
filter, activated carbon adsorbent, etc
Water
treatment equipment and new water plant and old water plant filter renovation,
can effectively carry out filtration and air water backwash, suitable for
beverage, printing and dyeing, swimming pool and other industrial water, can
also be applied
In
industrial waste water, domestic sewage treatment engineering, can also be used
for rapid filter drainage system.
Wire Mesh Filter Cap,Filter Cap,Metal Filter Cap,Stainless Steel Wire Mesh Filter Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.shaiwanghaoxiang.com
For the owner, dealing with tires every day, but for the tires, do you really understand? So, what do you know about cold knowledge of tires?
1 Tire pressure is clearly enough, why is it a bit embarrassing?
In this case, must we continue to refuel? In fact, it is not used, because the tires are now vacuum tires, tire pressure is generally between 2.2-2.6bai. If you determine that the tire pressure is enough, it looks normal, although it looks a bit bleary. Just keep the tire pressure normal.
Yellow spots on the car tires have the effect that can make the car balance 2 tires marked on the outside, is not loaded?
The inside label is inside. If this sign is installed outside, it can be determined that the tire is installed backwards. After the tire is reversed, it will accelerate the wear of the tire and will also affect the comfort of the vehicle.
What does the yellow dot on the tire mean?
The yellow point on the tire is actually a light point mark, which is the lightest place on the tire. Because the car is made up of tires, wheels, and valves, and the valve is the most important place for the tires, and the yellow point corresponding to the valve is the lightest point, the two points play a complementary role, can play The role of tire balance.
