AAC/Autoclave Aerated Concrete Block Machine

May 29, 2020

Trademark: Sankon
Origin: China
HS Code: 847480

Features & Advantages of lightweight aac wall floor panel 

1. Lightweight: Aerated concrete density is usually 400-900 kg/m3(according to the market), 

 which is 1/3 of clay block and 1/5 of common concrete. 

2.Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance,

 and do not emit harmful gases when meet fire

3.Sound insulation: As the material inside has a large numbers of the pores and porous, which 

has a  good thermal insulation properties.

4.Thermal Insulation: Thermal conductivity is 0.9-0.22 W/(MK), which is 1/4 of clay bricks.

5.Anti-seismic: It can improve the two seismic than the brick level.

 

Standard Size

Product  Name       

Height/Length  (mm) 

Width/Height (mm)

Thickness (mm)
AAC External Panel            ≤3600         600 100
AAC Extenral Panel           ≤4200         600 120
AAC External Panel           ≤5200         600 150
AAC External Panel           ≤6000         600 175
AAC Extenral Panel           ≤6000         600 200
       

AAC Internal Panel

          ≤3000

        600

75
AAC Internal Panel           ≤4000         600 100
AAC Internal Panel           ≤5000         600 120
AAC Internal Panel           ≤6000         600 150
AAC Internal Panel           ≤6000         600 175
AAC Internal Panel           ≤6000         600

200
       
AAC Floor Slab

          ≤1800

         600 75
AAC Floor Slab           ≤2100         600 100
AAC Floor Slab           ≤2400         600 120
AAC Floor Slab           ≤3400         600 150
AAC Floor Slab           ≤4500         600 200
AAC Floor Slab           ≤5700         600 250
AAC Floor Slab           ≤6000         600 300
       
AAC Roof Slab          ≤2700         600 100
AAC Roof Slab          ≤3500         600 120
AAC Roof Slab          ≤4000         600 150
AAC Roof Slab          ≤6000         600 200
AAC Roof Slab          ≤6000         600 250
AAC Roof Slab          ≤6000         600 300 

 

Special size

 

Product  Name             

Height/Length  (mm) 

Width/Height (mm)

Thickness(mm)

 

AAC Special Panel 1          ≤2400                 600            50                
AAC Special Panel 2          ≤3000         600

75 

AAC/Autoclave Aerated Concrete Block Machine
AAC/Autoclave Aerated Concrete Block Machine
AAC/Autoclave Aerated Concrete Block Machine
AAC/Autoclave Aerated Concrete Block Machine

 

X Ray Machine

The system matches with metal ceramic X-ray tube and high frequency solid insulate industrial X-ray HT generator, it applies forced cooling system to make sure X-ray machine can normally continuous work for 24 hours. The dimension of this kind of small focus X-ray tube is half of traditional focus tube, geometry unintelligibility is an important factor which affects image quality, if focus bigger, correspondingly, geometry unintelligibility is deeper, and also makes image edge much more blur; if focus smaller, geometry unintelligibility is lighter, it can improves image quality at same time, also focus is smaller can inspect smaller failure which is favor to improve X-ray RTR inspection stability.

The controlling part of system is researched and manufactured by ourselves, the intelligent main control PLC works matches with touch screen, beautiful and complete functional stainless steel panel that can display and adjust parameters much more convenient. When high voltage of system opens, there will be red light alarming signal outside of protect door, here installs interlock devices between lead door and system, in the case of opening lead door, system will stop radiation at once to assure safety of operators.

Units For X Ray RTR System

Butt Weld Pipe RTR System,Boiler Pipe RTR System,Casting RTR System,Wheel Hub RTR System

Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com