Downspout roll forming machine typically produce square and round downspouts for all types of large and small industrial plants, warehouses, residential and high-rise buildings.
It has two cutting ways, one is flying saw cutting, one is mould cutting, and this machine is PLC control, chain transmission, has high quality and long work time.
Specifcations:
Working process:
Pictures for machine:
Training and Installation : Downpipe Roll Forming Machine,Square Downpipe Roll Forming Machine,Cnc Downpipe Roll Forming Machine,Downpipe Cold Roll Forming Machinery YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Illustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:
1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
II.Technical Parameter
Model
LW30/80-3/4
Width scope of weaving
≤3m/4m
Mesh scope of weaving
25mm-80mm
Wire scope
3mm
Outside size
Main machine
6700*1430*1800
Net reel
5100*1700*1250
Motor
Servo Motor
5.5kw
Cutter
1.5kw
Rolling
0.75kw
Raw Material
Galvanized wire;PVC bag steel wire
Diameter of Wire
Mesh opening size
1.8mm
30-40mm
2.0mm
30-50mm
2.2mm
30-60mm
2.5mm
40-70mm
2.8mm
50-80mm
3.0mm
60-80mm
3.2mm
70-80mm
3.5mm
80-100mm
4.0mm
100mm*100mm
1. FOB CFR CIF all available
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1Â set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
V.Contact Information
Â
Â
Â
Â
Raw material
Pre-painted steel coils, Galvanized coils, Aluminum coils
Material thickness range
0.2-0.8mm
Rollers
14-18 row
Material of rollers
45# steel with chromed
Shaft diameter and material
76mm, material is 40Cr(can change as drawings)
Forming speed
10-15m/min(excluding cutting stop time)
Main motor power
4 KW
Hydraulic station power
3 KW
Mode of cutting
Flying saw or mould cutting or hydraulic cutting
Way of driven
Chain transmission or Gear box
Controlling system
PLC
Voltage
380V/3Phase/50Hz
Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Collection table
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Chain Link Fence Machine with Good Price
Model NO.: LW30/80-3
Low-Voltage: Schneider
Motor: Chiese Top Servo Motor
Technique: Single Model and Double Helix
Programmable Logic Controller: Japan Mitsubishi PLC
Alarm: Alarm Device
Electic&Machinery: Taiwan Teco Electric
Unit Weight: 4200kg
Material: Galvanized Iron Wire
Application: Construction Wire Mesh
Surface Treatment: Galvanized
Trademark: JIAKE
Transport Package: Plastic Films/Woden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
I. Description