masterbatch dosing machine
Constant weight feedingDefinite quantity of colour masterbatches or additives shall be added and mixed directly in the volumetric form. The excellent mixing quality can ensure consistency of color and quality of the product to the best. If the single raw material needs to be added in small dose, SAM series' constant weight feeder can meet the ideal quantitative requirements. The output varies from 195g/h to 381962g/h and HADRDEGA can recommend the more suitable screw types according to output requirements of the clients.Â
The cost as you can see
Mixed materials will not be scattered, which can save 1% to 2% materials at least;
Great savings in manpower and there is no need to mix the materials artificially;
Color and quality of the products can maintain their consistency and qualified rate of the products can be raised.
Specification
| Model | Single Color Unit | Double Color Unit | ||||||||
| CM30-24S | CM30-24 | CM30-20S | CM30-20 | CM30-16 | CM30-12 | CM30-08 | CM-D30/30 | CM-D30/50 | CM-D50/50 | |
| Motor Power(w) | 30 | 30 | 30 | 30 | 30 | 30 | 030 | 30*2 | 30*2 | 30*2 |
| Rev(r.p.m.) | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 | 0-3000 |
| Mixer Power(w) | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| Screw External Dia.(mm) | 24S | 24 | 20S | 20 | 16 | 12 | 8 | * | * | * |
| Output Capacity(kg/hr) | Â | 0.8-38 | Â | 0.4-20 | 0.2-10 | 0.1-3 | 0.08 -1.5 | ** | ** | ** |
| Storage Capacity(L) | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12*2 | 12*2 | 12*2 |
| Gear Ratio | 30:1 | 30:1 | 30:1 | 30:1 | 30:1 | 30:1 | 30:1 | 30/30 | 30/50 | 50/50 |
| Dimensions | Â | Â | Â | Â | Â | Â | Â | Â | Â | Â |
| H mm | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 |
| W mm | 550 | 550 | 550 | 550 | 550 | 550 | 550 | 930 | 930 | 930 |
| D mm | 295 | 295 | 295 | 295 | 295 | 295 | 295 | 295 | 295 | 295 |
| Net weight (kg) | 17 | 17 | 17 | 17 | 17 | 17 | 17 | 30 | 30 | 30 |
Mixing base can maintain mixing uniformity of the materials to the greater degree. When three or more materials are used simultaneously, uniformity of the raw materials will be maintained as long as the homogenizer is used. The evenly-mixed materials can continuously maintain the stable product quality and can raise qualified rate of the products.
Reliability
SAM series' constant weight feeder is designed according to the inclined push-delivery solution, which can reduce error of gram weight of each batch of push-delivered materials and which can ensure conformity of materials of each product.
The incomplete filling warning function and the auto-stop function of molding machine controlled by incomplete filling materials can avoid the product defect losses caused by incomplete filling materials.
The two-component usage scheme and the optional homogenizer with mixing functions can ensure that the materials will be fallen into the molding machine evenly.
EPT has 12 years of Rapid Tooling experience,by working closely with the customer and design team, we understand that real materials and higher quantities of parts are critical for testing, development,bridge production and clinical builds in very tight schedule.
Prototype tooling offers complex blowing molded parts with the shortest possible lead times.
You don`t have to re-design or simplify your parts for prototype tooling because our revolutionary process allows for undercuts and production quality tolerances and surface finishes.
Our experienced rapid tooling and molding engineers will work with the customer throughout the entire process , also share more structural and material recommendations before mass production to help customers achieve the best in product design.
Blowing Molding,Extrusion Blow Molding,Stretch Blow Molding,Plastic Blow Molding
Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com