The "fighter" in the engine on the Philippine red CURSOR 11 power express does not burst

In 2016, the order of “Double 11” on the day reached 657 million, which was 4.3 times that of 2013. The delivery and delivery cycle was greatly shortened, and the time for signing 100 million parcels was shortened from 9 days to 3.5 days.

According to the National Bureau of Statistics, the volume of express parcels during the double-eleven period in 2019 is expected to continue to grow by 225 million pieces, nearly double the number of parcels of 1.34 billion last year to reach the new level.

Faced with such a huge amount of express turnover, logistics and distribution must not be "dropped". In order to allow everyone to receive express delivery earlier, in the busiest moment of China's express logistics industry as a "fighter" in the engine, CURSOR 11 has already traveled around the world to provide reliable guarantee for express express vehicles.

Philippine Red CURSOR 11 engine

CURSOR 11 engine maximum horsepower 450 Ps maximum torque 2100 Nm excellent power output performance to ensure the timeliness of transportation.

This summer, the Hongyan Jieshi mid-axis freight train equipped with the CURSOR 11 engine has been recognized by users in the logistics industry for its “stronger power performance and more humanized vehicle design”, and won the “Quality of Customer Satisfaction in the Logistics Industry in 2019”. Five-star product title.

I believe that the reliable guarantee of the Philippine Red CURSOR engine on the double eleven this year will allow you to get the express faster, please buy and buy it with confidence!

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

• Good dimensional accuracy
• Smoother cast surface finish than sand casting
• Improved mechanical properties compared to sand casting
• Thinner walls can be cast compared to sand casting
• Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
• Steel pins and inserts can be cast in to the part
• Faster production times compared to other processes.
• Once the tolling is proven, the product quality is very repeatable.
• Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , https://www.hsiindustriel.com